CPC31411

Certificate III in Construction Waterproofing [Assessment Only]

PREVENT CAREER LEAKS

Are you ready to take your construction skills to the next level?

Certificate III in Construction waterproofing

Course Overview

This qualification is issued on assessment only. You are, and have been, working in building and construction industry for 6+ years. You will use your extensive experience to provide evidence to your assessor through our Recognition of Prior Learning (“RPL”) process. RPL and Skills Recognition is an assessment process allowing you to achieve all, or part, of a Nationally Recognised Qualification by demonstrating your knowledge, skills and experience in your trade. Generally, to complete a qualification via RPL your assessment will include provision of evidence of works completed, interview/s, including site visits and skills demonstrations.

Is the lack of a formal qualification holding you back?

Use your extensive experience in the industry to gain a qualification through Recognition of Prior Learning (RPL) process.

Career Outcomes

On completing this program, you will gain the diverse range of skills needed to work as a waterproofer within both the residential, civil and commercial construction industries. You'll develop your professional knowledge and the skills required to work in a number of roles in the building and construction industry as well.

Career support

Construction waterproofer

Networking Opportunities

Upon successful completion of this course, you could progress to further study at another institution with advanced standing or gain direct university articulation to one of our partner Universities.

CTI
Community

Join the Capital Training Institute Community, a network that spans across Australia. Gain access to employment and business opportunities, career support and events.

Course Info

This qualification is designed to meet the needs of those in the construction industry who wish to move into the waterproofing trade.

Course
Duration

Self-paced

RPL allows your prior knowledge, skills and experience to be assessed to allow you to achieve all, or part of, a nationally recognised qualification. 

Award

On successful completion a student will be awarded a CPC31411 Certificate III in Construction Waterproofing

Terms &
Conditions

Please refer to the CTI Student Manual 

Additional
Information

Our RPL Process
 
Meet with an assessor to determine your eligibility
The assessor will then work with you to gather your supporting evidence, ensuring alignment to the units in the qualification

Units of Competency

CPCCCM1012A Work effectively and sustainably in the construction industry

This unit of competency specifies the outcomes required to prepare for and sustain effective work within the construction industry. It covers the identification and clarification of the construction industry work context, scope and employment conditions, responsibility required to be accepted by the individual, working in a team, individual career path improvement activities and sustainable work practices and techniques.

CPCCCM1013A Plan and organise work

This unit of competency specifies the outcomes required to plan and organise individual and group work activities on a construction site. The unit includes identifying task requirements, planning steps and organising work.

CPCCCM1014A Conduct workplace communication

This unit of competency specifies the outcomes required to communicate effectively with other workers in a construction workplace environment. It includes gathering, conveying and receiving information through verbal and written forms of communication.

CPCCCM1015A Carry out measurements and calculations

This unit of competency specifies the outcomes required to carry out measurements and perform simple calculations to determine task and material requirements for a job in a construction work environment.

CPCCCM2001A Read and interpret plans and specifications

This unit of competency specifies the outcomes required to read and interpret plans and specifications relevant to construction operations. It includes the identification of types of plans and drawings and their functions, the recognition of commonly used symbols and abbreviations, the identification of key features and specifications on a site plan, the comprehension of written job specifications and the recognition of document status and amendment detail.

CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry

This unit of competency specifies the outcomes required to carry out OHS requirements through safe work practices at any on or off-site construction workplace. It requires the performance of work in a safe manner through awareness of risks and work requirements, and the planning and performance of safe work practices with concern for personal safety and the safety of others.

CPCCWP2001A Handle waterproofing materials

This unit of competency specifies the outcomes required to safely handle waterproofing materials manually and mechanically, including their storage requirements. It includes the preparation, handling, sorting, stacking and disposal of waterproofing products, materials and components in the application of waterproofing systems, including the disposal of waste.

CPCCWP2002A Use waterproofing tools and equipment

This unit of competency specifies the outcomes required to safely and effectively use tools and equipment used in waterproofing. It includes identification, selection and use of hand and power tools, plant and equipment used in masonry work.

CPCCWP2003A Prepare for construction waterproofing process

This unit of competency specifies the outcomes required to apply waterproofing to differing types of wet areas in varying building situations. It includes identification of the processes required and planning and preparation of materials for application.

CPCCWP2004A Prepare surfaces for waterproofing application

This unit of competency specifies the outcomes required to repair and prepare different material surfaces that form part of the application of waterproofing within the construction process. It includes the inspection, preparation for, and repair and finishing of surfaces prior to the application of the waterproofing process.

CPCCWP3001A Apply waterproofing process to below ground level wet areas

This unit of competency specifies the outcomes required to apply waterproofing practices and principles to wet areas below ground level. It includes identification of the waterproofing system to be used, its preparation and its application.

CPCCWP3002A Apply waterproofing process to internal wet areas

(N/A)

CPCCWP3003A Apply waterproofing process to external wet areas

This unit of competency specifies the outcomes required to apply waterproofing practices and principles to external wet areas. It includes identification of the waterproofing system to be used, its preparation and its application.

CPCCWP3004A Apply waterproofing remedial processes

This unit of competency specifies the outcomes required to apply remedial waterproofing processes to external and below ground level wet areas, using injection epoxy, cement crystallisation or hydrostatic coating methods. It includes identification of the waterproofing system to be used, its preparation and its application.

CPCCCA3012A Frame and fit wet area fixtures

This unit of competency specifies the outcomes required to install supporting framework for fixtures and flashings associated with the wet area construction for a bath, shower base and sink or basin unit, and preparation for wet area linings. It includes bathroom, laundry, shower, toilet and en suite wet areas.

CPCCCM2007B Use explosive power tools

This unit of competency specifies the outcomes required to apply safe and effective operation of explosive power tools (EPT), used to fasten materials or fix fasteners to bases. It includes both direct action and indirect action explosive powered fastening tools.

CPCCCM2008B Erect and dismantle restricted height scaffolding

This unit of competency specifies the outcomes required to erect and dismantle restricted height scaffolding to provide work platforms for various occupational applications. It includes placement of safety barriers and only involves modular scaffolding restricted to a height of 4 metres.

CPCCCM2009A Carry out basic demolition

This unit of competency specifies the outcomes required to remove components from single storey buildings and structures using basic demolition techniques. It includes the preparation of the site for the demolition process and the removal of components.

CPCCCM2010B Work safely at heights

This unit of competency specifies the outcomes required to work safely on construction sites where the work activity involves working above 1.5 metres from ground level and where fall protection measures are required.

Assessment Methods

This course will typically be assessed through a range of assessments, including:

  1. Face-to-Face Interview
  2. Skills Assessment
  3. Portfolio of Evidence

Entry Requirements

This qualification is issued on assessment only. You are, and have been, working in building and construction industry for 6+ years. You will use your extensive experience to provide evidence to your assessor through our Recognition of Prior Learning (“RPL”) process. RPL and Skills Recognition is an assessment process allowing you to achieve all, or part, of a Nationally Recognised Qualification by demonstrating your knowledge, skills and experience in your trade. Generally, to complete a qualification via RPL your assessment will include provision of evidence of works completed, interview/s, including site visits and skills demonstrations. Assessment only

  1. Assessment only

Dates & Fees

For information on course commencement dates and course fees, contact your relevant state office. For information on VET FEE-HELP qualifications, click here.

FINANCIAL SUPPORT

Don't let money stop you from furthering your education. You could access a variety of programs to help you study, including state and commonwealth funding schemes, or an educational loan. Click here to find out more >

* Must be an Australian citizen

FAQs

About Capital Training Institute (CTI), Studying at CTI, Financial Assistance & Why enroll in further education

What is a Registered Training Organisation (RTO)?

Registered Training Organisations (RTO) are providers of courses endorsed by the Australian Skills Quality Authority (ASQA). RTO’s are also accredited to assess participants against each course’s criteria and, as a result, the qualifications they issue are nationally recognised.

Capital Training Institute (CTI) is one of Australia's largest and most trusted independently owned Registered Training Organisations (RTO).

What are the advantages of online learning?

The Internet has spurred huge changes in the way we learn. The days of hefty textbooks, endless trips to the library and piles of notes are drawing to a close as online platforms offer

  • Faster and more effective ways of gaining knowledge.
  • More comfortable learning environment
  • Convenience and flexibility
  • Avoid commuting 
Are workshops, lectures and tutorials compulsory?

For all qualifications attendance is mandatory, which includes workshops, lectures and tutorials. If a student has an unexpected, unplanned or unavoidable absence, they must contact CTI as soon as possible to arrange an alternative to any training that may be missed. For more information please refer to our Student Manual at https://issuu.com/ctiaustralia/docs/student_manual_2015_lq/1?e=10413670/15279501

Have a different question?